Filament Maker maintenance: replacing the nozzle

Changing the nozzle of the machine does not have to be done very often by default. The nozzle should be changed when it is fully of partially clogged, dirty, or when a different size of nozzle is required.

Guide: Material selection – Choosing the right polymer

The purging process-walkthrough for upholding your extruder’s performances.

DIY build your own fumehood

Additives enhance certain properties of the polymers. Only basic understanding of extrusion is required to process these composite filaments.

Troubleshooting: Extruder Motor or Encoder Error

It might happen that you are facing the following error message on the display of your Filament Maker, along with it shutting off: “Motor or encoder error”. There are multiple possible causes for this, which are described in this article, along with how to act accordingly and hopefully fix the issue. The Motor or Encoder error refers to the extruder screw not being able to rotate anymore.

Firmware updates

Here you will find all the firmware updates that we have released for the Filament Maker up to today. Loading the latest version is very important to keep getting good extrusion results.

Dryer Airid – Quick Start Guide

Download Airid Dryer’s Quick Start Guide