Additives enhance certain properties of the polymers. Only basic understanding of extrusion is required to process these composite filaments.
This author has yet to write their bio.
Meanwhile lets just say that we are proud manos contributed a whooping 54 entries.
In these series of articles we will get the fundamental knowledge about extrusion starting from an introduction to Polymers.
In the second part of Introduction articles about extrusion, we try to explain with simple words, what exactly is extrusion, what happens to the materials when we extrude them, amd how an extruder machine works!
In the series of “Technical Datasheet” articles, we will try to focus on a rather simple but also important topic, that of the technical specifications that comes with any polymer out there.
In the second part of the series of the technical datasheet (dts) articles, we will have a better look on the content of a DTS and which part of it is relevant for the extrusion.
In the third and the last article of the technical datasheet articles, we will go one step further, explaining and giving specific examples on how to transfer the information you got from your TDS document to your filament maker settings.
Are you in the mood to extrude ? The following steps will take you through the whole extrusion journey, with crucial tips and warnings, so that you can use your Filament Maker to produce good quality filament of your own materials.
Our experiences with the recycling of shredded polyether ether ketone (PEEK). Starting with a batch of PEEK regrind, we adjust the extrusion settings for optimal filament quality.
This page gathers license information about the various software made available by 3devo B.V. Select your software below.
DevoVision is a way to display your Filament Maker data directly in a graph in real time, and then save the graphs for future analysis. You’re able to customize your own graphs, and that will help you understand extrusion experiments, find better settings, and quality check your spools.