Useful guides and tutorials for your machines!

Cleaning the shredder SHR3D IT

Cleaning the SHR3D-IT properly will increase the quality of your recycling results. It is important to clean the machine carefully and correctly, so that the shredded material which ends up in the granulate collector only consists of the pure material and no different plastics mixed together.

Guide: purging/cleaning the Filament Maker – Full version

The purging process-walkthrough for upholding your extruder’s performances.

Filament Maker reparation: diagnosing faulty heaters

If you think your heaters are faulty, our Service team might ask you to perform a heater diagnosis.

Filament Maker maintenance: replacing the nozzle

Changing the nozzle of the machine does not have to be done very often by default. The nozzle should be changed when it is fully of partially clogged, dirty, or when a different size of nozzle is required.

Filament Maker reparation: replacing heaters

If one or more of the heaters of your Filament Maker have been diagnosed faulty, our Service team might send you a new heater or set of heaters. This guide will show you how to replace the heaters of your Filament Maker.

Thermocouple Error Fix