Getting Started

Are you just getting started with your machines? Of course we highly recommend to go through our on-boarding (How to start) procedure first, but here you will find all the rest of the information you need to get started!

How to make a perfect spool of PLA

This article will guide you through all the tips and tricks to perfect your first spool of PLA, in this case the PLA 4043D that was supplied along with your Filament Maker!

On-boarding guide

This guide will get you started with your new Filament Maker, and provide you with all the necessary information to get the best experience possible.

Dryer Airid – Quick Start Guide

Download Airid Dryer's Quick Start Guide

Dryer Airid User Manual

Download Airid Dryer's User manual

Getting started with extruding your material

Are you in the mood to extrude? The following steps will take you through the whole extrusion journey, with crucial tips and warnings, so that you can use your Filament Maker to produce good quality filament of your own materials.

Logging data with DevoVision App

DevoVision is a way to display your Filament Maker data directly in a graph in real time, and then save the graphs for future analysis. You're able to customize your own graphs, and that will help you understand extrusion experiments, find better settings, and quality check your spools.

Activate your Filament Maker

Activating your Filament Maker, using an activation code, will give you access to the whole potential of the machine.

Machine features: shredder SHR3D IT

Here are the main features and parts of our shredder Shr3d It, presented with drawings and explanations.
Oops!

There are not available articles for this topic just yet! Don’t worry though, we are working on that! New articles and videos are added to the platform almost every week! In the meantime if you have any questions let’s discuss them on our forums.