Lower output than expected

During the extrusion it might be possible that the output of material is too low resulting in filament that is too tin. This could be caused by a material or hardware issue. In this article is described what to do if you encounter a low output.

Important note!

Hardware issues can cause output issues; however, before you look into it, it’s wise to make sure the problem is not caused by your selected settings, or the material(s) used.

1. Possible causes of low output

When wrong parameters are set during the extrusion process it can result in low output. In the following chapter is explained what could cause this low output and how you can fix it.

3. Hardware issue

A hardware issue could cause a low output. When the possible fixes explained in the previous chapter do not solve the issue you can send an email to service@3devo.com