Tag Archive for: replacement

Filament Maker maintenance: Replacing the puller wheels

After using the puller wheel for a while it is possible that the wheel becomes damaged. This could have an effect on the extrusion results therefore it is time to change the wheel.

Filament Maker maintenance: Cleaning the sensor

After using the filament maker for a while or in a dusty environment it is important to check and clean the sensor.

Filament Maker maintenance: replacing the nozzle

Changing the nozzle of the machine does not have to be done very often by default. The nozzle should be changed when it is fully of partially clogged, dirty, or when a different size of nozzle is required.

Filament Maker maintenance: replacing the nozzle

Changing the nozzle of the machine does not have to be done very often by default. The nozzle should be changed when it is fully of partially clogged, dirty, or when a different size of nozzle is required.

Filament Maker reparation: replacing heaters

If one or more of the heaters of your Filament Maker have been diagnosed faulty, our Service team might send you a new heater or set of heaters. This guide will show you how to replace the heaters of your Filament Maker.

Thermocouple Replacement

…