Filament Maker X10 – Data Dashboard
The Filament Maker X10 automatically records and stores data generated during extrusion. The collected data can be accessed through the X10's internal InfluxDB dashboard when the machine is connected to a LAN.
Access the Data Dashboard
Before starting, obtain the X10's IP address and InfluxDB login credentials from the machine settings.
- Open a web browser on a PC or laptop connected to the same network.
- Enter the following address:
<IP address FMX10>:8086
For example:
192.168.1.123:8086
- Press Enter.
- An Influx Login window will appear.
- Enter the InfluxDB credentials recorded from the X10.
- The dashboard will open.
What Can You Monitor?
Depending on the software version, the dashboard may provide information such as:
- Extrusion parameters
- Temperature data
- Filament diameter
- Filament roundness
- Machine operating data
- Historical extrusion data
💡 Note: Dashboard functionality and available data may change as the X10 software is updated.
Next Step
To access and interact with the X10 touchscreen remotely: Filament Maker X10 – Remote Monitoring and Control