Boxing the Filament Maker TWO

Placeholder, please update

These boxing instructions should be carefully followed whenever you are returning the machine for any reason, including but not limited to, the end of a lease agreement or maintenance and repairs. Proper boxing is essential to prevent any potential damage during transit and to ensure that the machine arrives safely at its destination. Taking the time to pack the machine correctly not only protects the equipment but also facilitates a smooth return process. Remember, adhering to these guidelines is crucial for maintaining the integrity of the machine and preserving any warranties or service agreements.

Note: Failing to follow the instructions below could lead to machine damage, which is not covered under warranty by 3devo.

Boxing steps

  1. Put the machine on its pallet and remove the hopper.
  2. Screw back the 4 screws on the middle and front part of the pallet
  3. Place the packages inside the machine
  4. Slide the cardboard box with the foam inside downwards
  5. Add the top polyurethane foam and close the box
  6. Put tape on the top and wrap two straps vertically around the box and through the pallet
1. 2. 3.
Boxing Step 1 Boxing Step 2 Boxing Step 3
4. 5. 6.
Boxing Step 4 Boxing Step 5 Boxing Step 6