Filament Maker X10 – Cleaning the Extrusion Area
Regular cleaning helps prevent polymer residue and dust from accumulating around the extrusion components.
⚠️ Important: Turn the Filament Maker X10 OFF and allow hot components to cool completely before cleaning.
Step 1 – Remove Remaining Filament
Remove any remaining filament from the extrusion area.
If necessary, carefully cut away filament using a clean, sharp tool such as pliers.
Step 2 – Clean the Extrusion Area
Use a soft, non-abrasive microfiber cloth and a chemical- and lotion-free cleaning solution to remove:
- Polymer residue
- Dust
- Other contamination
Clean accessible components carefully without damaging cables, sensors, or other machine parts.
Step 3 – Inspect the Cooling Fans
Visually inspect the cooling fans for debris.
If debris is present, carefully remove it using a soft brush.
Keeping the fans clean helps maintain proper airflow and cooling performance.
🔥 Warning: Make sure the extrusion area is completely cool before beginning cleaning.
Next Step
After cleaning the extrusion area, inspect the nozzle for residue, clogging, or wear: Filament Maker X10 – Inspecting and Replacing the Nozzle
Flow
Purging the Extrusion System
→ Cleaning the Extrusion Area
→ Inspecting and Replacing the Nozzle