Skip to content
Contact us!
  • There are no suggestions because the search field is empty.

Filament Maker X10 – Filament Sensor Data and Camera Feed

The Filament Sensor continuously collects filament data and includes a camera for monitoring the extrusion process.

The sensor data and camera feed can be accessed through a web browser when the X10 is connected to the network.

Access the Filament Sensor Feed
  1. Open a web browser.
  2. Enter:

<IP address FMX10>:8000

For example:

192.168.1.123:8000

  1. Press Enter.
  2. The Filament Sensor data feed will be displayed.

The feed includes the available sensor information and a live video stream of the extrusion process.

X10 Network Interfaces
Address Interface Purpose
:80 X10 Interface Monitor and remotely control the machine
:8000 Filament Sensor View sensor data and camera stream
:8086 InfluxDB Review and analyze extrusion data

Quick Access Example

If the X10 IP address is:

192.168.1.123

Use:

Machine Interface

192.168.1.123:80

Filament Sensor

192.168.1.123:8000

Data Dashboard

192.168.1.123:8086

Next Step

If you are unable to access one of the interfaces: Filament Maker X10 – Network Troubleshooting