Filament Maker X10 – Remote Monitoring and Control
The Filament Maker X10 touchscreen interface can be accessed remotely from a PC or laptop connected to the same network. This allows you to monitor the machine and interact with the interface without standing directly in front of the touchscreen.
Access the Remote Interface
- Open a web browser.
- Enter the following address:
<IP address FMX10>:80
For example:
192.168.1.123:80
- Press Enter.
- The Filament Maker X10 interface will be displayed in the browser.
Remote Control Safety
⚠️ Important: Remote control must never replace physical supervision of the Filament Maker X10.
Remote commands can affect an active extrusion process.
For example, remotely changing:
- Temperature
- Extruder speed
- Material feed
- Spooling parameters
can affect the extrusion process or potentially damage the machine.
Always physically monitor the Filament Maker X10 when using remote control.
Next Step
To view Filament Sensor data and the live camera feed: Filament Maker X10 – Filament Sensor Data and Camera Feed