Filament Maker X10 – Using the Touchscreen Interface
Learn how to navigate the main touchscreen dashboards and access the controls used during operation.
Home Dashboard
The Home dashboard provides an overview of the machine and access to the main controls.
The Home screen consists of three main areas:
| Area | Function |
|---|---|
| Main menu | Navigate between available dashboards |
| Control panel | Set machine parameters |
| Data panel | Review and confirm machine parameters |
Main Menu
The main menu provides access to:
- Home
- Extruder Temperatures
- Extruder Speed
- Material Diameter
- Settings
Extruder Temperatures
The Extruder Temperatures dashboard allows you to control and monitor the heating zones.
You can:
- Adjust individual heater temperatures.
- View the temperature of each heating zone.
- Confirm selected temperature settings.
⚠️ Important: Always use temperatures appropriate for the material being processed. Refer to the material manufacturer's Technical Data Sheet.
Extruder Speed
The Extruder Speed dashboard allows you to monitor and adjust the operating speed of machine components.
The dashboard provides:
- Current speed information.
- Speed controls.
- Cooling fan controls.
Use the + and – buttons to adjust machine speed.
The controls can also be used to:
- Start machine components.
- Pause machine components.
- Adjust operating speed.
Diameter and Spooling
The Diameter and Spooling dashboard allows you to monitor filament and control the spooling process.
It provides:
- Filament diameter
- Filament roundness
- Start Spooling
- Spooling setup
- Spool status
Settings
The Settings dashboard provides access to:
- Notifications
- Material presets
- Spooling presets
- Machine network configuration
💡 Note: Firmware updates may change the appearance or functionality of the touchscreen interface. Always refer to the latest online documentation.
Next Step
If you are preparing material for extrusion, continue with: Filament Maker X10 – Operating the SmartFlow Hopper