The shredder blades can be removed for cleaning and maintenance procedures, with these few easy steps.
Caution
For all adjustments and maintenance activities to the machine, make sure to turn the machine off and remove the power cable.
Warning
Always wear cut resistant gloves when working around and inside the cutting chamber.
To start this procedure, please remove the scraper combs as explained in the previous chapter.
- Unscrew the two bolts on the front of the machine using an 8mm Allen key and remove the black casing plate.
- The ends of the shredder shafts are now exposed. Remove all four hexagon nuts from both shafts.
 |
 |
- Unscrew the four bolts using an 8mm Allen key and slide the front plate towards you.
 |
 |
- Now, you can remove the shredder blades and spacers one by one.
 |